Petal/crown shape reduces flare and aberration of light.
GOOD QUALITY PRODUCT!
for 55mm screw fit ( not bayonet fitting, please check your lens)
Petal lens hood for all 55mm lens threads. When used it does not allow for a lens cap to be fitted, lens hood will need to be removed to fit lens cap. This lens hood screws into the front of your lens or filter as a very good alternative to an expensive original hood. It also has a clamp collar nut that only needs a slight pressure to tighten onto your lens so it it not easily lost.. Some edge shadowing may occur depending on your lens. Some Wide angle lenses may show excessive shadows and this hood is not recommended. Internal focus lenses only recommended also otherwise the petal hood would spin on focus. Fits these lenses and others with a 55mm thread or filter.
Dedicated lens hoods are designed to match the specific focal length of the lens it designed for. Suitable for Nikon AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR II lens. Replacement for Nikon HB-69.
Black matte inner surface is designed to reduce the light’s glare, Prevent glare by stopping light from coming into the lens at side angles.
Extra protection from accidental impact.
The bayonet mount design makes it firmly on the lens.
Plastic Material Black color petal shape.
This hood provides a cost-effective solution to the problems caused by sun glare rain and wind-blown debris and is also valuable in providing protection against knocks and damage. An essential piece of kit for owners of this lens.
Material: ABS Plastic. Mount Type: Bayonet Mount. Install Type: Snap-on Included: 1 x Lens hood replaced for HB-69.
Suitable For: Nikon AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR II lens This hood is only applicable to the Nikon 18-55 lens with lens locks